Many different kinds of inhalers are available to treat asthma. They come in a variety of shapes and colors, but they all work the same way.
Some inhalers are combine steroid and LABA medications. These are typically red in color and are call controller or preventer medications. Other inhalers are steroid only and are blue.
How to Use an Inhaler
A meter dose inhaler is a small, hand-held device that delivers medication in the form of a spray. It is often prescribe with a spacer, a plastic tube that holds the spray and allows your breath to pass through it so the medicine can reach your lungs.
You should always follow your doctor’s instructions for using a particular inhaler and, if you have questions, ask your doctor or pharmacist. You can also help to specialitymedz pharmacy. Generally, you will need to shake the inhaler five or six times and then remove the mouthpiece cover. Place a spacer over the mouthpiece at the end of your inhaler and put your teeth and lips around it. Breathe in slowly and deeply through the spacer and firmly squeeze the top of your inhaler at the same time. Keep inhaling even after you have stop squeezing the canister.
Using a spacer is important, but not all MDIs come with one. If you don’t have a spacer, your doctor can prescribe one for you or you can purchase a simple spacer online. You should clean your MDI regularly to keep it working properly and to ensure that the medicine makes it deep into your lungs. It is best to use warm tap water to clean your inhaler, but never wash the canister itself or immerse it in water.
It is also a good idea to carry your inhaler with you when you travel because it may be more difficult to get the right dosage if you are not at home. You should also bring your inhaler to each of your medical appointments so your health care professional can check that you are using it correctly and make sure the inhaler is in good condition.
It is easy to misuse an MDI without realizing it, but this can prevent the medication from reaching your lungs. In fact, many patients who use an MDI do not get the full benefit of their medicines because they don’t activate the inhaler at the right time. A stopwatch or a clock with a second hand can help you learn to synchronize your breathing with the inhaler, so that you can actuate the device at just the right moment to get the full benefit of your medications.
Prime the Inhaler
An inhaler is a device that sprays out medicine to be breath into the lungs. Inhalers are made of two parts: the medicine and the propellant, which carries the medicine into the lungs. Before the first use, steps need to be taken to make sure the medicine is mix with the propellant. This is call priming the White Inhaler. The instructions that come with your inhaler tell you when and how to prime it.
Before you can use the MDI, take off the cap and shake it several times to mix the medicine with the propellant. This is important to do before every use of the inhaler, but especially if it’s new or hasn’t been use for seven days. This is to ensure that you get the right amount of medication with each inhalation.
Then slide the cartridge unit with the wheel and disk back into the body of the inhaler. The disk will have numbers in the side indicator window that let you know how many doses it contains. The wheel on the front of the inhaler will turn when it’s ready to use.
To use the MDI, push down on the mouthpiece and breath in deeply and slowly through your nose and mouth. Hold your breath for 10 seconds and then breathe out fully. Repeat this 3-4 times. If you have a spacer, put it over the MDI mouthpiece and seal it with your lips. This will help to prevent the spray from irritating your throat, mouth, or mouth and gums. If you do not have a spacer, rinse your mouth out with water after each use of the inhaler to reduce hoarseness and infection.
After using the inhaler, wipe down the mouthpiece with a cloth and then dry it with a tissue or paper towel. It’s important to keep the inhaler clean because if it is not cleane well, it can build up with bacteria and contaminate the next dose of medicine. Then the inhaler will not be able to release the correct amount of medicine into your lungs. In addition, a dirty inhaler can also cause the medicine to taste unpleasant or sting your throat.
Using a Spacer
Some inhalers require a spacer to deliver the medication properly. A spacer is a clear plastic tube with a mouthpiece at one end and an opening for the inhaler at the other. The person places the inhaler inside the spacer and then breathes in through the mouthpiece. A spacer improves the results of using a meter dose inhaler (MDI) because it increases the amount of medicine that gets to the small airways of the lungs. People can use a spacer with MDIs, which are use for most asthma medications, and also with inhalers that have a face mask for infants, toddlers, and children up to age 4.
To use an inhaler with a spacer, first remove the caps from both. Shake the Red and White Inhaler and the spacer vigorously before each use. Next, look in each mouthpiece to ensure there is no medication left inside. Often, an inhaler will have a counter on the back that tells you how many puffs remain. If the counter reads zero, the inhaler is empty and should be replace immediately.
Put the inhaler mouthpiece into your mouth and close your lips around it. Press down on the canister top to release a puff of medication into the spacer. Inhale slowly through the mouthpiece over about five seconds. If you hear the spacer whistle, you blew out too fast and did not inhale the medication effectively.
After the inhalation, hold your breath for about 10 seconds. Then, breathe out until your lungs are clear. Repeat this process if necessary. Most people need two or three doses per day of their MDI in this way.
Inhalers are easy to use, but a little bit of training can make them even more effective. A child who is just learning how to use a spacer might benefit from having a parent or teacher sit in front of them and help them maintain an upright posture. They can also practice six slow breaths to learn how to get the most out of their inhaler. A person should check the spacer regularly for cracks or other damage and clean it as recommend by the manufacturer.
Using an Inhaler with a Meter Dose Inhaler
The inhaler is a small device that delivers a dose of medication to the lungs. It is often a combination of two drugs that act in parallel to treat different conditions. The way you use your inhaler will depend on your doctor’s instructions and the condition you have.
A meter dose inhaler (MDI) contains a pressurise canister with the medicine inside, and it is activate when you breath in. You can get a variety of types and brands of MDIs, which are also known as dry powder inhalers. They are quick to use and convenient, but they need good co-ordination in order for you to press the canister and breathe in at the same time.
To prepare an MDI for use, you should shake it and remove the mouthpiece cover. You should then wipe the mouthpiece with a clean cloth before using it. You should also check that there is no foreign object in the mouthpiece and that it is not block by your teeth or gums. The inhaler should be kept at room temperature and away from extremes of heat and cold.
You should also check that the counter on your MDI is working properly. If you see a red mark on the window, then it is time to refill the Cheapest Inhaler For Asthma. It is a good idea to keep a calendar or write down the date when you will need a new canister of medication.
Some MDIs come with a spacer, which is designe to make the inhalation easier. Follow your doctor’s instructions about using the spacer with your inhaler. If your doctor doesn’t provide a spacer, you can buy one from a pharmacy or online.
Breathe in slowly through the mouthpiece of the inhaler and hold your breath for a few seconds. Then, release your breath and exhale normally. Repeat the inhalation and breathing-in process as needed.
